Tag Archives: Craig Holt

A meditation on physical units: Part 2

[Preface: This is the second part of my discussion of this paper by Craig Holt. It has a few more equations than usual, so strap a seat-belt onto your brain and get ready!]

“Alright brain. You don’t like me, and I don’t like you, but let’s get through this thing and then I can continue killing you with beer.”    — Homer Simpson

Imagine a whale. We like to say that the whale is big. What does that mean? Well, if we measure the length of the whale, say by comparing it to a meter-stick, we will count up a very large number of meters. However, this only tells us that the whale is big in comparison to a meter-stick. It doesn’t seem to tell us anything about the intrinsic, absolute length of the whale. But what is the meaning of `intrinsic, absolute’ length?

Imagine the whale is floating in space in an empty universe. There are no planets, people, fish or meter-sticks to compare the whale to. Maybe we could say that the whale has the property of length, even though we have no way of actually measuring its length. That’s what `absolute’ length means. We can imagine that it has some actual number, independently of any standard for comparison like a meter-stick.

"Not again!"
“Oh no, not again!”

In Craig’s Holt’s paper, this distinction — between measured and absolute properties — is very important. All absolute quantities have primes (also called apostrophes), so the absolute length of a whale would be written as whale-length’ and the absolute length of a meter-stick is written meter’. The length of the whale that we measure, in meters, can be written as the ratio whale-length’ / meter’ . This ratio is something we can directly measure, so it doesn’t need a prime, we can just call it whale-length: it is the number of meter sticks that equal a whale-length. It is clear that if we were to change all of the absolute lengths in the universe by the same factor, then the absolute properties whale-length’ and meter’ would both change, but the measurable property of whale-length would not change.

Ok, so, you’re probably thinking that it is weird to talk about absolute quantities if we can’t directly measure them — but who says that you can’t directly measure absolute quantities? I only gave you one example where, as it turned out, we couldn’t measure the absolute length. But one example is not a general proof. When you go around saying things like “absolute quantities are meaningless and therefore changes in absolute quantities can’t be detected”, you are making a pretty big assumption. This assumption has a name, it is called Bridgman’s Principle (see the last blog post).

Bridgman’s Principle is the reason why at school they teach you to balance the units on both sides of an equation. For example, `speed’ is measured in units of length per time (no, not milligrams — this isn’t Breaking Bad). If we imagine that light has some intrinsic absolute speed c’, then to measure it we would need to have (for example) some reference length L’ and some reference time duration T’ and then see how many lengths of L’ the light travels in time T’. We would write this equation as:


where C is the speed that we actually measure. Bridgman’s Principle says that a measured quantity like C cannot tell us the absolute speed of light c’, it only tells us what the value of c’ is compared to the values of our measuring apparatus, L’ and T’ (for example, in meters per second). If there were some way that we could directly measure the absolute value of c’ without comparing it to a measuring rod and a clock, then we could just write c’ = C without needing to specify the units of C. So, without Bridgman’s Principle, all of Dimensional Analysis basically becomes pointless.

So why should Bridgman’s Principle be true in general? Scientists are usually lazy and just assume it is true because it works in so many cases (this is called “proof by induction”). After all, it is hard to find a way of measuring the absolute length of something, without referring to some other reference object like a meter-stick. But being a good scientist is all about being really tight-assed, so we want to know if Bridgman’s Principle can be proven to be watertight.

A neat example of a watertight principle is the Second Law of Thermodynamics. This Law was also originally an inductive principle (it seemed to be true in pretty much all thermodynamic experiments) but then Boltzmann came along with his famous H-Theorem and proved that it has to be true if matter is made up of atomic particles. This is called a constructive justification of the principle [1].

The H Theorem makes it nice and easy to judge whether some crackpot’s idea for a perpetual motion machine will actually run forever. You can just ask them: “Is your machine made out of atoms?” And if the answer is `yes’ (which it probably is), then you can point out that the H-Theorem proves that machines made up of atoms must obey the Second Law, end of story.

Coming up with a constructive proof, like the H-Theorem, is pretty hard. In the case of Bridgman’s Principle, there are just too many different things to account for. Objects can have numerous properties, like mass, charge, density, and so on; also there are many ways to measure each property. It is hard to imagine how we could cover all of these different cases with just a single theorem about atoms. Without the H-Theorem, we would have to look over the design of every perpetual motion machine, to find out where the design is flawed. We could call this method “proof by elimination of counterexamples”. This is exactly the procedure that Craig uses to lend support to Bridgman’s Principle in his paper.

To get a flavor for how he does it, recall our measurement of the speed of light from equation (1). Notice that the measured speed C does not have to be the same as the absolute speed c’. In fact we can rewrite the equation as:


and this makes it clear that the number C that we measure is not itself an absolute quantity, but rather is a comparison between the absolute speed of light c’ and the absolute distance L’ per time T’. What would happen if we changed all of the absolute lengths in the universe? Would this change the value of the measured speed of light C? At first glance, you might think that it would, as long as the other absolute quantities on the left hand side of equation (2) are independent of length. But if that were true, then we would be able to measure changes in absolute length by observing changes in the measurable speed of light C, and this would contradict Bridgman’s Principle!

To get around this, Craig points out that the length L’ and time T’ are not fundamental properties of things, but are actually reducible to the atomic properties of physical rods and clocks that we use to make measurements. Therefore, we should express L’ and T’ in terms of the more fundamental properties of matter, such as the masses of elementary particles and the coupling constants of forces inside the rods and clocks. In particular, he argues that the absolute length of any physical rod is equal to some number times the “Bohr radius” of a typical atom inside the rod. This radius is in turn proportional to:


where h’, c’ are the absolute values of Planck’s constant and the speed of light, respectively, and m’e is the absolute electron mass. Similarly, the time duration measured by an atomic clock is proportional to:


As a result, both the absolute length L’ and time T’ actually depend on the absolute constants c’, h’ and the electron mass m’e. Substituting these into the expression for the measured speed of light, we get:


where X,Y are some proportionality constants. So, the factors of c’ cancel and we are left with C=X/Y. The numbers X and Y depend on how we construct our rods and clocks — for instance, they depend on how many atoms are inside the rod, and what kind of atom we use inside our atomic clock. In fact, the definition of a `meter’ and a `second’ are specially chosen so as to make this ratio exactly C=299,792,458 [2].

Now that we have included the fact that our measuring rods and clocks are made out of matter, we see that in fact the left hand side of equation (5) is independent of any absolute quantities. Therefore changing the absolute length, time, mass, speed etc. cannot have any effect on the measured speed of light C, and Bridgman’s principle is safe — at least in this example.

(Some readers might wonder why making a clock heavier should also make it run faster, as seems to be suggested by equation (4). It is important to remember that the usual kinds of clocks we use, like wristwatches, are quite complicated things containing trillions of atoms. To calculate how the behaviour of all these atoms would change the ticking of the overall clock mechanism would be, to put it lightly, a giant pain in the ass. That’s why Craig only considers very simple devices like atomic clocks, whose behaviour is well understood at the atomic level [3].)

image credit: xetobyte – A Break in Reality

Another simple model of a clock is the light clock: a beam of light bouncing between two mirrors separated by a fixed distance L’. Since light has no mass, you might think that the frequency of such a clock should not change if we were to increase all absolute masses in the universe. But we saw in equation (4) that the frequency of an atomic clock is proportional to the electron mass, and so it would increase. It then seems like we could measure this increase in atomic clock frequency by comparing it to a light clock, whose frequency does not change — and then we would know that the absolute masses had changed. Is this another threat to Bridgman’s Principle?

The catch is that, as Craig points out, the length L’ between the mirrors of the light clock is determined by a measuring rod, and the rod’s length is inversely proportional to the electron mass as we saw in equation (1). So if we magically increase all the absolute masses, we would also cause the absolute length L’ to get smaller, which means the light-clock frequency would increase. In fact, it would increase by exactly the same amount as the atomic clock frequency, so comparing them would not show us any difference! Bridgman’s Principle is saved again.

Let’s do one more example, this time a little bit more extreme. According to Einstein’s theory of general relativity, every lump of mass has a Schwarzschild radius, which is the radius of a sphere such that if you crammed all of the mass into this sphere, it would turn into a black hole. Given some absolute amount of mass M’, its Schwarzschild radius is given by the equation:


where c’ is the absolute speed of light from before, and G’ is the absolute gravitational constant, which determines how strong the gravitational force is. Now, glancing at the equation, you might think that if we keep increasing all of the absolute masses in the universe, planets will start turning into black holes. For instance, the radius of Earth is about 6370 km. This is the Schwarzschild radius for a mass of about a million times Earth’s mass. So if we magically increased all absolute masses by a factor of a million, shouldn’t Earth collapse into a black hole? Then, moments before we all die horribly, we would at least know that the absolute mass has changed, and Bridgman’s Principle was wrong.

Of course, that is only true if changing the absolute mass doesn’t affect the other absolute quantities in equation (6). But as we now know, increasing the absolute mass will cause our measuring rods to shrink, and our clocks to run faster. So the question is, if we scale the masses by some factor X, do all the X‘s cancel out in equation (6)?

Well, since our absolute lengths have to shrink, the Schwarzschild radius should shrink, so if we multiply M’ by X, then we should divide the radius R’ by X. This doesn’t balance! Hold on though — we haven’t dealt with the constants c’ and G’ yet. What happens to them? In the case of c’, we have c’ = C L’ / T’. Since L’ and T’ both decrease by a factor of X (lengths and time intervals get shorter) there is no overall effect on the absolute speed of light c’.

How do we measure the quantity G’? Well, G’ tells us how much two masses (measured relative to a reference mass m’) will accelerate towards each other due to their gravitational attraction. Newton’s law of gravitation says:


where N is some number that we can measure, and it depends on how big the two masses are compared to the reference mass m’, how large the distance between them is compared to the reference length L’, and so forth. If we measure the acceleration a’ using the same reference length and time L’,T’, then we can write:


where the A is just the measured acceleration in these units. Putting this all together, we can re-arrange equation (7) to get:


and we can define G = (A/N) as the actually measured gravitational constant in the chosen units. From equation (9), we see that increasing M’ by a factor of X, and hence dividing each instance of L’ and T’ by X, implies that the absolute constant G’ will actually change: it will be divided by a factor of X2.

What is the physics behind all this math? It goes something like this: suppose we are measuring the attraction between two masses separated by some distance. If we increase the masses, then our measuring rods shrink and our clocks get faster. This means that when we measure the accelerations, the objects seem to accelerate faster than before. This is what we expect, because two masses should become more attractive (at the same distance) when they become more massive. However, the absolute distance between the masses also has to shrink. The net effect is that, after increasing all the absolute masses, we find that the masses are producing the exact same attractive force as before, only at a closer distance. This means the absolute attraction at the original distance is weaker — so G’ has become weaker after the absolute masses in the universe have been increased (notice, however, that the actually measured value G does not change).

Diagram of a Cavendish experiment for measuring gravity.

Returning now to equation (6), and multiplying M’ by X, dividing R’ by X and dividing G’ by X2, we find that all the extra factors cancel out. We conclude that increasing all the absolute masses in the universe by a factor of a million will not, in fact, cause Earth to turn into a black hole, because the effect is balanced out by the contingent changes in the absolute lengths and times of our measuring instruments. Whew!

Craig’s paper is long and very thorough. He compares a whole zoo of physical clocks, including electric clocks, light-clocks, freely falling inertial clocks, different kinds of atomic clocks and even gravitational clocks made from two orbiting planets. Not only does he generalize his claim to Newtonian mechanics, he covers general relativity as well, and the Dirac equation of quantum theory, including a discussion of Compton scattering (a photon reflecting off an electron). Besides all of this, he takes pains to discuss the meaning of coupling constants, the Planck scale, and the related but distinct concept of scale invariance. All in all, Craig’s paper just might be the most comprehensive justification for Bridgman’s principle so far in existence!

Most scientists might shrug and say “who needs it?”. In the same way, not many scientists care to examine perpetual motion machines to find out where the flaw lies. In this respect, Craig is a craftsman of the first order — he cares deeply about the details. Unlike the Second Law of Thermodynamics, Bridgman’s Principle seems rarely to have been challenged. This only makes Craig’s defense of it all the more important. After all, it is especially those beliefs which we are disinclined to question that are most deserving of a critical examination.



[1] Some physical principles, like the Relativity Principle, have never been given a constructive justification. For this reason, Einstein himself seems to have regarded the Relativity Principle with some suspicion. See this great discussion by Brown and Pooley.

[2] Why not just set it to N=1? Well, no reason why not! Then we would replace the meter by the `light second’, and the second by the `light-meter’. And we would say things like “Today I walked 0.3 millionths of a light second to buy an ice-cream, and it took me just 130 billion light-meters to eat it!” So, you know, that would be a bit weird. But theorists do it all the time.

[3] To be perfectly strict, we cannot assume that a wristwatch will behave in the same way as an atomic clock in response to changes in absolute properties; we would have to derive their behavior constructively from their atomic description. This is exactly why a general constructive proof of Bridgman’s Principle would be so hard, and why Craig is forced to stick with simple models of clocks and rulers.